Create Compass app in Sketchware

 To create a Compass app in Sketchware, follow the steps given below.

1. In View area add an ImageView imageview1. Set image of a Compass as it's image. Make sure that North is towards the top.


2. Create a Gyroscope component gyro and another Gyroscope component gyroMagnet.


3. Create a More block extra and put following code in it.

}

private float[] floatGravity = new float[3];

private float[] floatGeoMagnetic = new float[3];

private float[] floatOrientation = new float[3];

private float[] floatRotationMatrix = new float[9];

{


4. In onCreate event use blocks

Gyroscope gyro sensor stop,

and Gyroscope gyroMagnet sensor stop.

After that put following code in an add source directly block:

gyro.registerListener(_gyro_sensor_listener, gyro.getDefaultSensor(Sensor.TYPE_ACCELEROMETER),SensorManager.SENSOR_DELAY_NORMAL);

gyro.registerListener(_gyroMagnet_sensor_listener, gyro.getDefaultSensor(Sensor.TYPE_MAGNETIC_FIELD),SensorManager.SENSOR_DELAY_NORMAL);



5. In onPause event use blocks

Gyroscope gyro sensor stop,

and Gyroscope gyroMagnet sensor stop.


6. In onResume event put following code in an add source directly block:

gyro.registerListener(_gyro_sensor_listener, gyro.getDefaultSensor(Sensor.TYPE_ACCELEROMETER),SensorManager.SENSOR_DELAY_NORMAL);

gyro.registerListener(_gyroMagnet_sensor_listener, gyro.getDefaultSensor(Sensor.TYPE_MAGNETIC_FIELD),SensorManager.SENSOR_DELAY_NORMAL);


7. In gyro: onSensorChanged event use an add source directly block and put following code:

floatGravity = _param1.values;

SensorManager.getRotationMatrix(floatRotationMatrix, null, floatGravity, floatGeoMagnetic);

SensorManager.getOrientation(floatRotationMatrix, floatOrientation);

imageview1.setRotation((float) (-floatOrientation[0]*180/3.14159265359));



8. In gyroMagnet: onSensorChanged event use an add source directly block and put following code:

floatGeoMagnetic = _param1.values;

SensorManager.getRotationMatrix(floatRotationMatrix, null, floatGravity, floatGeoMagnetic);

SensorManager.getOrientation(floatRotationMatrix, floatOrientation);

imageview1.setRotation((float) (-floatOrientation[0]*180/3.14159265359));



9. Save and run the project. You will see the top of image rotate to the North direction.



Comments

  1. UnknownFebruary 16, 2021 at 2:47 AM

    Nice blog . I have also been making tutorials related to Sketchware. In my Sketchware Interface video I have explaines each and every part of the Sketchware app itself. Do check my channel to learn more about sketchware.
    My channel link - https://youtube.com/channel/UCOUL_rPb3vQZoQ_ENC9lB3w

    Thanks Sanjeev sir. I have learnt about sketchware by watching your videos . So Thanks a lot.

    ReplyDelete
  2. UnknownFebruary 16, 2021 at 4:00 AM

    Great Work Sir

    kindly solve my problem .
    i created a pdf reader and wanted to be it as default App.
    i got success to do so when i view a pdf file from Myfiles.

    But when i tried to open a pdf in whatsapp error occurred.
    Because here Uri like

    content //com.whatsapp.provider.media/item/9231

    is received instead of Real Path.

    kindly explain how can this URi is converted into Real Path ?

    ReplyDelete
  3. Ashutosh KumarFebruary 17, 2021 at 10:53 AM

    I am also interested android apps development. & I have Coded several app from Android Aide.

    My Blog - Ashu4Tech.com (A4T)

    ReplyDelete
  4. AnonymousMarch 1, 2021 at 8:03 AM

    Hello Sir
    Do you know how to turn off Anti-Alisasing of an imageview.
    An example I have a car pixel art, and its parameters is 24 x 36 pixels.
    But when i load the image in the app, the anti-aliasing is blurred off the image.
    I want to see the picture like this:
    https://i.stack.imgur.com/UnUzg.png

    But this is how the app shows the picture:
    https://drive.google.com/file/d/1xhbZIwlxU0JvnBiqsQF0ipaGY6aSw3MU/view?usp=sharing

    Is there any way to turn off this terrible function.

    Thanks, and have a nice day ;)

    ReplyDelete
  5. AnonymousMarch 23, 2021 at 9:25 PM

    Sir,I am facing error

    ReplyDelete
  6. RJune 3, 2021 at 2:04 PM

    This comment has been removed by the author.

    ReplyDelete

Post a Comment

Popular posts from this blog

Simple car racing android game in Sketchware

Image
To create a simple car racing game in sketchware follow the steps given below. 1. Create a new project in Sketchware. 2. In VIEW area of main.xml add a TextView textview3 for displaying score of previous game, a TextView textview4 for displaying high score, and a Button button1 for starting game. 3. In MainActivity , add a Shared Preferences component sp:sp . 4. Add onStart event and put blocks to set the text of textview3 and textview4 . 5. Create a new page page2.xml . 6. On button1 click use intent to move to page2 . 7. On page2.xml add a LinearV linear1 with padding 0 and width and height MATCH_PARENT. 8. In Page2Activity , add a Shared Preferences component sp:sp . 9. Create a number variable highscore . 10. In onCreate event of Page2Activity , use blocks to set the value of number variable highscore , and use codes to create a new GameView and add it to linear1 , as shown in image below. The code used in the add source directly bloc
Read more

Creating a Drawing View in Sketchware

Image
 To create a DrawingView with undo button, follow the instructions given below. 1. Create a new project in Sketchware. 2. In main.xml , add a LinearLayout linear1 with height wrap_content, weight 1, and padding 0. Add a LinearHorizontal below it, containing following ImageViews: imageview_stroke_width , imageview_stroke_color , imageview_background , imageview_undo,  and  imageview_clear. 3. Create a more block canvas and put following codes in it. Here we create a new View class called DrawingView and a new class called PathPaint. } DrawingView dv; private Paint mPaint; private Canvas mCanvas; private ArrayList<PathPaint> all_paths = new ArrayList<>(); public class DrawingView extends View { private Bitmap mBitmap; private Paint mBitmapPaint; Context context; private Paint circlePaint; private Path circlePath; private Path mPath; public DrawingView(Context c) { super(c); context=c; mPath = new Path(); mBitmapPaint = new Paint(Paint.DITHER_FLAG); circlePath = new Path();
Read more

Enable Fullscreen for Youtube videos in WebView

Image
To enable fullscreen mode for YouTube videos in your sketchware project, follow the steps given below. 1. Create a new project in Sketchware. 2. In VIEW area add a WebView  webview1. 3. Create a more block  extra . 4. In the more block  extra , use an add source directly blocks and put codes to define a new WebChromeClient class with name CustomWebClient . } public class CustomWebClient extends WebChromeClient { private View mCustomView; private WebChromeClient.CustomViewCallback mCustomViewCallback; protected FrameLayout frame; // Initially mOriginalOrientation is set to Landscape private int mOriginalOrientation = android.content.pm.ActivityInfo.SCREEN_ORIENTATION_LANDSCAPE; private int mOriginalSystemUiVisibility; // Constructor for CustomWebClient public CustomWebClient() {} public Bitmap getDefaultVideoPoster() { if (MainActivity.this == null) { return null; } return BitmapFactory.decodeResource(MainActivity.this.getApplicationContext().getResources
Read more

How to enable upload from webview in Sketchware?

Image
Now that Sketchware has a block to add java code directly in the project, it is possible to enable file upload in webview. To enable file upload in webview in sketchware app, follow the steps given below. 1. Insert a webview in VIEW area in the sketchware project. Note the ID of webview, usually it is webview1 . 2. In LOGIC area of project, in onCreate event, add the block add source directly and copy the following code in it: webview1.setWebChromeClient(new WebChromeClient() { // For 3.0+ Devices protected void openFileChooser(ValueCallback uploadMsg, String acceptType) { mUploadMessage = uploadMsg; Intent i = new Intent(Intent.ACTION_GET_CONTENT); i.addCategory(Intent.CATEGORY_OPENABLE); i.setType("image/*"); startActivityForResult(Intent.createChooser(i, "File Browser"), FILECHOOSER_RESULTCODE); } // For Lollipop 5.0+ Devices public boolean onShowFileChooser(WebView mWebView, ValueCallback<Uri[]> filePathCallback, WebChromeClient.FileChoose
Read more

List of Calendar Format symbols valid in Sketchware

Image
The calendar Format block in Sketchware provides a space where we can write the format in which we want the date or time to be displayed. We can use various symbols to construct our own custom date format. Here is a list of valid symbols along with their use which can be used in Sketchware for formatting the date/calendar. In all examples the date 12 Jul 2017 17:19:56 has been used. d : date of month without 0 prefix, e.g. 12. dd : date of month in two digits, e.g. 12. M : month in year, e.g. 7. MM : month in year in two digits, e.g. 07. MMM : month name in year displayed as three letter abbreviation, e.g. Jul. MMMM : month in year displayed as full month name, e.g. July. MMMMM : first letter of month name, e.g. J. y : year, e.g. 2017. yy : last two digits of year, e.g. 17. yyyy : year, e.g. 2017. h : hour in day in 12-hour format, e.g. 5. hh : hour in day in two digits, e.g. 05. H : hour in day in 24-hour format, e.g. 17. HH : hour in day 24-hour format in two
Read more