Create Imageview with rounded corners in Sketchware

To create an ImageView showing image with rounded corners follow the steps given below.

1. In your Sketchware android project, add an ImageView imageview1, and set your desired image in imageview1.


2. In LOGIC area of your project, in onCreate event, add two add source directly blocks.

3. In the first add source directly block, add the following code which creates a bitmap image from imageview1.
Bitmap bm = ((android.graphics.drawable.BitmapDrawable) imageview1.getDrawable()).getBitmap();

4. Then apply class getRoundedCornerBitmap(Bitmap, int) to round the corners of bitmap image, and then set it as image of imageview1, using following code in the same block.
imageview1.setImageBitmap(getRoundedCornerBitmap(bm, 360));


Note that in above code, imageview1 is id of Imageview and it should be changed as per the id of your Imageview.

The underlined text 360 is the extent to which the corners are rounded. It can be changed between 0 and 360 as per the requirement. 360 is maximum, whereas 0 is minimum. 0 creates a square or rectangle.

5. In second add source directly block, add the following code which defines the class getRoundedCornerBitmap(Bitmap, int).

}
public static Bitmap getRoundedCornerBitmap(Bitmap bitmap, int pixels) { Bitmap output = Bitmap.createBitmap(bitmap.getWidth(), bitmap.getHeight(), Bitmap.Config.ARGB_8888); Canvas canvas = new Canvas(output); final int color = 0xff424242; final Paint paint = new Paint(); final Rect rect = new Rect(0, 0, bitmap.getWidth(), bitmap.getHeight()); final RectF rectF = new RectF(rect); final float roundPx = pixels; paint.setAntiAlias(true); canvas.drawARGB(0, 0, 0, 0); paint.setColor(color); canvas.drawRoundRect(rectF, roundPx, roundPx, paint); paint.setXfermode(new PorterDuffXfermode(PorterDuff.Mode.SRC_IN)); canvas.drawBitmap(bitmap, rect, rect, paint); return output;

This should be the last block in onCreate event in Sketchware.

6. Save and run the project. You will find your image with rounded corners in Imageview.

Comments

  1. We are from AshNovember 13, 2017 at 5:09 PM

    wow nice

    ReplyDelete
  2. Kannan O VDecember 13, 2017 at 8:44 PM

    Superb

    ReplyDelete
  3. UnknownMarch 4, 2018 at 10:20 AM

    How to make round edges of textview

    ReplyDelete
  4. e-lab innovationsAugust 30, 2018 at 12:43 AM

    How to remove that color and show transparent?

    ReplyDelete
  5. Danu VirgiawanNovember 11, 2018 at 9:37 AM

    How to solve the problem of double variables to create another round corner image??

    ReplyDelete
  6. Ramachandra HegdeAugust 18, 2019 at 2:22 AM

    Giving error on drawable. How can I fix it?

    ReplyDelete
  7. HseApril 17, 2020 at 2:53 AM

    Is show invalid character on the 'getBitmap' for 1st block and 'setImageBitmap' at 2nd block, how to solve?

    ReplyDelete
  8. ex abrishMarch 26, 2021 at 4:46 AM

    how to set corner radius for imageview for one corner or two corners

    ReplyDelete

Post a Comment

Popular posts from this blog

Simple car racing android game in Sketchware

Image
To create a simple car racing game in sketchware follow the steps given below. 1. Create a new project in Sketchware. 2. In VIEW area of main.xml add a TextView textview3 for displaying score of previous game, a TextView textview4 for displaying high score, and a Button button1 for starting game. 3. In MainActivity , add a Shared Preferences component sp:sp . 4. Add onStart event and put blocks to set the text of textview3 and textview4 . 5. Create a new page page2.xml . 6. On button1 click use intent to move to page2 . 7. On page2.xml add a LinearV linear1 with padding 0 and width and height MATCH_PARENT. 8. In Page2Activity , add a Shared Preferences component sp:sp . 9. Create a number variable highscore . 10. In onCreate event of Page2Activity , use blocks to set the value of number variable highscore , and use codes to create a new GameView and add it to linear1 , as shown in image below. The code used in the add source directly bloc
Read more

Enable Fullscreen for Youtube videos in WebView

Image
To enable fullscreen mode for YouTube videos in your sketchware project, follow the steps given below. 1. Create a new project in Sketchware. 2. In VIEW area add a WebView  webview1. 3. Create a more block  extra . 4. In the more block  extra , use an add source directly blocks and put codes to define a new WebChromeClient class with name CustomWebClient . } public class CustomWebClient extends WebChromeClient { private View mCustomView; private WebChromeClient.CustomViewCallback mCustomViewCallback; protected FrameLayout frame; // Initially mOriginalOrientation is set to Landscape private int mOriginalOrientation = android.content.pm.ActivityInfo.SCREEN_ORIENTATION_LANDSCAPE; private int mOriginalSystemUiVisibility; // Constructor for CustomWebClient public CustomWebClient() {} public Bitmap getDefaultVideoPoster() { if (MainActivity.this == null) { return null; } return BitmapFactory.decodeResource(MainActivity.this.getApplicationContext().getResources
Read more

How to enable upload from webview in Sketchware?

Image
Now that Sketchware has a block to add java code directly in the project, it is possible to enable file upload in webview. To enable file upload in webview in sketchware app, follow the steps given below. 1. Insert a webview in VIEW area in the sketchware project. Note the ID of webview, usually it is webview1 . 2. In LOGIC area of project, in onCreate event, add the block add source directly and copy the following code in it: webview1.setWebChromeClient(new WebChromeClient() { // For 3.0+ Devices protected void openFileChooser(ValueCallback uploadMsg, String acceptType) { mUploadMessage = uploadMsg; Intent i = new Intent(Intent.ACTION_GET_CONTENT); i.addCategory(Intent.CATEGORY_OPENABLE); i.setType("image/*"); startActivityForResult(Intent.createChooser(i, "File Browser"), FILECHOOSER_RESULTCODE); } // For Lollipop 5.0+ Devices public boolean onShowFileChooser(WebView mWebView, ValueCallback<Uri[]> filePathCallback, WebChromeClient.FileChoose
Read more

Creating a Drawing View in Sketchware

Image
 To create a DrawingView with undo button, follow the instructions given below. 1. Create a new project in Sketchware. 2. In main.xml , add a LinearLayout linear1 with height wrap_content, weight 1, and padding 0. Add a LinearHorizontal below it, containing following ImageViews: imageview_stroke_width , imageview_stroke_color , imageview_background , imageview_undo,  and  imageview_clear. 3. Create a more block canvas and put following codes in it. Here we create a new View class called DrawingView and a new class called PathPaint. } DrawingView dv; private Paint mPaint; private Canvas mCanvas; private ArrayList<PathPaint> all_paths = new ArrayList<>(); public class DrawingView extends View { private Bitmap mBitmap; private Paint mBitmapPaint; Context context; private Paint circlePaint; private Path circlePath; private Path mPath; public DrawingView(Context c) { super(c); context=c; mPath = new Path(); mBitmapPaint = new Paint(Paint.DITHER_FLAG); circlePath = new Path();
Read more

List of Calendar Format symbols valid in Sketchware

Image
The calendar Format block in Sketchware provides a space where we can write the format in which we want the date or time to be displayed. We can use various symbols to construct our own custom date format. Here is a list of valid symbols along with their use which can be used in Sketchware for formatting the date/calendar. In all examples the date 12 Jul 2017 17:19:56 has been used. d : date of month without 0 prefix, e.g. 12. dd : date of month in two digits, e.g. 12. M : month in year, e.g. 7. MM : month in year in two digits, e.g. 07. MMM : month name in year displayed as three letter abbreviation, e.g. Jul. MMMM : month in year displayed as full month name, e.g. July. MMMMM : first letter of month name, e.g. J. y : year, e.g. 2017. yy : last two digits of year, e.g. 17. yyyy : year, e.g. 2017. h : hour in day in 12-hour format, e.g. 5. hh : hour in day in two digits, e.g. 05. H : hour in day in 24-hour format, e.g. 17. HH : hour in day 24-hour format in two
Read more